TBS Source Two 5" Bind and Fly (FrSky)
- Brand: Team BlackSheep
- Product Code: TBS-S2-BNF-FRS
- QTY Remaining: Out Of Stock
The Source Two 5" frame is an ultralight, single-bottom stretched racing frame, made for speed addicts and grassroots FPV racers. It is designed to maximize speed and minimize drag. It fits and protects all the classic FPV components and while it is optimized for racing, it can be used for freestyle as well.
The Sky Ready RC BNF (bind and fly) build comes outfitted with proven electronic components to give you the ultimate in performance and durability, while still keeping costs down. Smooth flight performance and crystal clear video feed are achieved as a result. We take our time with each solder joint and make sure everything is installed and assembled professionally, so you can completely enjoy your flight experience!
This build features the DYS SE Pro 2205 motors, which have solder tabs instead of built in motor wire. What does this mean? It means if you happen to damage a motor so severely that it needs replacing, you can do so in the field by simply un-soldering the three wires from the motor tabs, and soldering them onto the new motor. No need to go into your electronics stack to replace a motor.
Future Proof! The electronics in this build are capable of handling up to 6s direct lipo voltage. Upgrading to 6s in the future requires only lower kV motors.
This BNF has been fully built and test flown for you, so you can simply bind to your FrSky radio, set up your preferred switches and fly! Our professional build team takes the guess work out of building and tuning for you by pre-programming the flight controller settings and using only high quality motors, ESCs and FPV gear.
- Wheelbase 5": 220mm
- Top Plate: 2mm
- Bottom Plate: 3mm
- Standoff height: 25mm
- Arm thickness: 4mm
- Stack Mounting: 30.5 × 30.5mm & 20mm x 20mm
- Weight: 72g
- Compact size for 5" propellers
- "Bumpers" on the end of the arms to protect the motor during a crash
- Lightweight and rigid
BNF Included Components and Parts:
- 1 x fully built and tested TBS Source Two 5" Quadcopter
- 4 x DYS SE Pro 2205 2300Kv Motors (Other options available)
- 1 x DYS F30A 30amp 4 in 1 BLHeli_S ESC 2-6S
- 1 x DYS F4 Pro V2 Flight Controller
- 1 x TBS Unify Pro Nano VTX with race band (25mw-50mw)
- 1 x Foxeer Arrow Micro Camera
- 1 x FrSky XM+ Receiver
- 2 x sets of (4) HQ Prop V1S 5x4.3x3 propellers (choose color)
The airframe is professionally hand built and test flown. Simply bind the receiver to your FrSky transmitter, set up the switches on your transmitter, and you are ready to fly!
The DYS F4 Pro V2 Advanced flight controller comes pre-flashed with BetaFlight 3.3.3. The Unify Pro Nano VTX comes set to Raceband channel 1, on 25mw.
Coupons not accepted for Bind and Fly drones.