You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

FREE SHIPPING ON U.S. ORDERS OF $100 OR MORE

Sky Ready RC

Search

Products meeting the search criteria

Sale
-8%
The DYS F4 PRO V2 is a high performance Flight Controller designed for FPV hobbyists. DYS F4 PRO V2 not only combines the PDB board with the flight controller, but also has an integrated OSD, current meter, voltmeter and built-in high power BEC. It is integrated with an OSD and Current Sensor, so you don't need to flash firmware, and you can debug OSD via a BF ground station. You also can adjust t..
$34.99 $38.19
The Hobbywing Xrotor Micro F4-G3 Flight Controller uses the OMNIBUSF4SD firmware. This flight controller is compatible with all ESCs, as well as the Hobbywing Xrotor 60a 4-in-1 ESC, without soldering.Features:Super-high Running FrequencyThe STM32F405 MCU which features the powerful computing capability and super-high running frequency allows the FC to run the PID and gyro with higher frequency.Pro..
$39.99
The Lumenier TX5GS FPV Video Transmitter has tons of features, like BFCMS Control, adjustable power output of 25-200-500mW, and comes with a durable MMCX antenna connector.The TX5GS is the perfect all around FPV VTX. This transmitter features the latest in VTX technology, allowing you to fully operate Frequency and Power settings via your Radio Controller or BetaFlight OSD. No more needing to reac..
$29.99
Sale
-3%
This is the newest of the CL Racing flight controller line, the F4 Mini 20x20.Did you enjoy the full-size CL Racing FC?  With the current trend of downsizing just about everything, CL Racing has turned their full-size FC into this 20x20 mini flight controller. With a host of features usually only found on a full-size board, this mini FC gives you micro build size with an insane capabi..
$28.99 $29.99
Sale
-14%
This is the updated version 1.4 of the CL Racing F4 flight controller. Now compatible with all ESCs.Please NOTE: The 9v jumper has been soldered from the factory. If you wish to run 5v, you must un-solder the 9v jumper and solder the 5v jumper to prevent damage to your device.Features:Built in user selectable 9v or 5v 2A filtered BEC for camera and VTXDedicated hardware inversion: connect to UART3..
$29.99 $34.99
The DYS F4 Pro Flight Controller uses the OMNIBUSF4 firmware. It is integrated with OSD and Current Sensor, so you don't need to flash firmware, and you can debug OSD via BF ground station. You also can adjust the PID by OSD via remote control. The integrated current sensor can monitor the real-time power consumption. This DYS F4 Pro Flight Controller is compatible with all ESCs, as well as DYS 4-..
$38.99
This tightly integrated system packs the FC, ESC, RX, VTX, PDB, CURRENT SENSOR and OSD into neatly stacked boards that can be easily serviced or upgraded. The pinned board interconnects offer a clean wire free look and the compact stack can fit even the tightest builds with ease.6 in 1 Main Board - F4 FC + Betaflight OSD + LC Filter + 5v Regulator + Blackbox + BuzzerThe heart of the flight c..
$109.99
Sale
-20%
This is the bundled version of the Hobbywing Xrotor Micro F4-G2 Flight Controller and Xrotor Micro 4in1 45a BL32 ESC.Features:Super-high Running Frequency. The STM32F405 MCU which features the powerful computing capability and super-high running frequency allows the FC to run the PID and gyro with higher frequency.ProShot1000, DShot 150/300/600/1200, Oneshot125, Oneshot42, Multishot Modes Supporte..
$79.99 $99.99
Sale
-12%
The Hobbywing Xrotor Micro F4-G2 Flight Controller uses the OMNIBUSF4SD firmware. This flight controller is compatible with all ESCs, as well as the Hobbywing 4-in-1 ESC, without soldering.Features:Super-high Running FrequencyThe STM32F405 MCU which features the powerful computing capability and super-high running frequency allows the FC to run the PID and gyro with higher frequency.ProShot1000, D..
$34.99 $39.99
Sale
-44%
The Lumenier LUX V2 flight controller is the next generation of the popular Lumenier LUX. It uses a powerful F3 processor along with top of the line hardware. Unleash the capabilities of your FPV Racing Quadcopter with the Lumenier LUX Flight Controller. Achieve gyro refresh rates up to 8kHz (high speed SPI) using popular Betaflight, CleanFlight and RaceFlight firmware along with ultra low looptim..
$19.99 $35.99
The Lumenier MICRO LUX F4 Flight Controller brings incredible power and performance to the micro brushless world. It uses a powerful F4 processor along with top of the line hardware. Now you can get all the performance from an F4 based flight controller in a micro size! This flight controller uses 20x20mm mounting holes and a low profile design, allowing for smaller airframe designs than ever befo..
$38.99
This is the bundled version of the Hobbywing Xrotor F4 Flight Controller and Xrotor Micro 4in1 40a ESC.Features:Super-high Running Frequency. The STM32F405 MCU which features the powerful computing capability and super-high running frequency allows the FC to run the PID and gyro with higher frequency.DShot 150/300/600/1200, Oneshot125, Oneshot42, Multishot Modes Supported. Besides the latest Dshot..
$94.99
The Hobbywing Xrotor F4 Flight Controller uses the OMNIBUSF4SD firmware. This flight controller is compatible with all ESCs, as well as the Hobbywing 4-in-1 ESC, without soldering.Features:Super-high Running FrequencyThe STM32F405 MCU which features the powerful computing capability and super-high running frequency allows the FC to run the PID and gyro with higher frequency.DShot 150/300/600/1200,..
$38.99
Showing 1 to 13 of 13 (1 Pages)