You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.


Sky Ready RC

Hobbywing Xrotor Micro 4in1 60a 6s BL32 ESC

  • Brand: Hobbywing
  • Product Code: HWG-XRTR-60A
  • QTY Remaining: Pre-Order

The Hobbywing Xrotor Micro 4in1 60a 6s ESC uses the BLHeli32 firmware. This 4in1 ESC is compatible with all flight controllers, as well as the Hobbywing XRotor F4-G3, without soldering.


1. Power capacitor must be installed. Every Xrotor 60amp 4-1 includes 2 power capacitors. One larger, and one smaller. The larger capacitor should be used for 5s-6s lipo, the smaller capacitor can be installed for 4s-5s lipo directly on the PCB (ESC), not by a power plug. Failure to use the included power capacitors will result in damage to your ESC.

2. BL_Heli_32 ESC settings can cause damage. Default settings should be used.

3. Motor KV ratings and prop size/pitch combinations recommendations.

- 4s Lipo using 5 inch props up to 2700KV
- 5s using 5 inch props, up to 2450 KV
- 6s using 5 inch props up to 1750 KV


  • The ESC firmware uses hardware generated motor pwm for smooth throttle response and silent operation. Damped light does regenerative braking.
  • DShot150/300/600/1200 Ready
  • Besides the regular PWM mode, Oneshot 125/Oneshot42/Multishot modes, the latest DShot150/300/600/1200 modes are also supported. In DShot150/300/600/1200 modes, the ESC has great anti-interference performance and rapid response.
  • BLHeli32 Firmware Ready


  • Firmware: BLHeli32
  • Lipo Power Input: 3-6S
  • Continuous Current: 60a x 4
  • Burst Current: 80a x 4
  • BEC Output: 5V@0.6a
  • Input wires: 12AWG 130mm
  • Net weight: 15g
  • Size: 30.5x30.5mm


  • 1x Hobbywing Xrotor Micro 4in1 60a 6s BL32 ESC
  • 1x XT60 Pigtail
  • 1x Connector set
  • 1x Capacitor set
  • 1 x Manual

Coupons not accepted for this product.

Write a review

Please login or register to review

Related Products