Free Shipping

Free U.S. shipping on all orders of $100 or more

Hobbywing Xrotor Combo 40A ESC + F7 FC (Convertible)

Hobbywing Xrotor Combo 40A ESC + F7 FC (Convertible)
Click image for Gallery
  • Brand: Hobbywing
  • Product Code: HWG-XRTR-F7-BNDL
  • Availability: Out Of Stock
  • $119.99
- +


Tags: hobbywing, xrotor, combo, 40a, esc, (convertible), hwg-xrtr-f7-bndl

Hobbywing Xrotor Combo 40A ESC + F7 FC (Convertible)

This is the bundled version of the Hobbywing Xrotor F7 Convertible Flight Controller and Xrotor Nano 4in1 40a BL32 ESC.

Features:

XRotor F7 Flight Controller (Convertible)

  • Special interface for DJI image transmission system With DJI image transmission system port, equipped with corresponding flat cable (FC has been equipped), can avoid welding, realize plug and play.

  • The unique flexible flat cable connection mode (The effect is better with hobbywing tower 4in1 ESC ), and the shock absorption mechanism of installation hole, can effectively reduce the impact of external vibration on FC high-sensitivity components, and make the flight more stable and accurate. Unique installation design and shock absorption structure. The double hole distance mounting hole design (30 * 30MM & 20 * 20MM) can adapt to different frames. For 20x20 installation, simply remove the outer 30x30 mounting tabs and install rubber dampers to inner holes.
  • Super hardware and running speed Equipped with STM32F722 MCU which has powerful computing ability and fast running speed, and high sensitivity ICM20602 six-axis motion sensor. It can perfectly support bidirectional DShot digital throttle communication. The integrated OSD chip can adjust and set each OSD parameters in FC parameter adjustment software and radio, which is simple and convenient. On-board large capacity Flash memory chip can record and store more flight logs, which is convenient for users to debug aircraft based on flight data.

  • On-board 5V & 12V dual BEC circuit FMU integrates with 12V BEC circuit. It can supply super power output for image transmission and 12V LED devices.
  • On-board Pit Switch module FC integrated Pit Switch module can open or close VTX by radio after being adjusted on FC parameter software. Easy and convenient.


Xrotor Nano 40a 4in1 ESC:

  • High-performance 32-bit microprocessor with a running frequency of up to 48MHz for an excellent performance.
  • BLHeli_32 firmware is the third generation BLHeli, following base BLHeli and BLHeli-S.
  • All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
  • The code supports features to prevent sync loss. There are tunable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environment.
  • The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us) and Multishot (5-25us).
  • Dshot signaling is supported at any rate up to at least Dshot1200. The input signal is automatically detected by the ESC upon power-up.
  • The code also supports a beacon functionality, where the ESC will start beeping after a given time of zero throttles. This can be very useful for finding lost crafts.

IMPORTANT:

Power capacitor must be used. Every Xrotor 40amp 4-1 includes a power capacitor. Failure to use the included power capacitor will result in damage to your ESC.

Specifications (Xrotor Nano 40a BL32 4in1):

  • Firmware: Hobbywing_XRotor_BLHeli_32 Version
  • DShot150/300/600/1200
  • Lipo Power Input: 3-6S
  • Continuous Current: 40a x 4
  • Burst Current: 60a x 4
  • BEC Output: NO
  • Input wires: Red-14AWG-100mm/ Black-14AWG-100mm
  • Net weight: 12g
  • Mounting Hole Dimensions: 20x20mm

Specifications (Xrotor F7 Convertible Flight Controller):

  • Firmware:
  • MCU: STM32F722
  • BEC Output: 5v/12v
  • Gyro: ICM20602
  • Voltage Monitoring: Supported
  • Current Monitoring: Supported
  • External Buzzer: Supported
  • Led Control: Supported
  • Net weight:
  • Size:
  • Hole Distance: 30.5x30.5mm OR 20x20mm

Includes:

  • 1x Hobbywing Xrotor Nano 4in1 40a BL32 ESC
  • 1x Hobbywing Xrotor F7 Convertible Flight Controller
  • 1x XT60 Pigtail
  • 1x Hardware package with standoffs
  • 1x Connector set
  • 1x Capacitor
  • 1 x Manual

Coupons not accepted for this product.

Write a review

Please login or register to review

Related Products