Lumenier QAV-X Charpu Bind and Fly (DSMX)
- Brand: Lumenier
- Product Code: LUM-CHARPU-DMSX
- QTY Remaining: Pre-Order
The Lumenier QAV-X CHARPU FPV racing quadcopter is a symmetrical X, light weight, super stiff, finely tuned airframe designed for high performance FPV Drone Racing. The QAV-X was created in collaboration with and named after the World-Famous Lumenier team pilot, CHARPU as featured in the WIRED video article. This racing airframe is stripped down to the bare essentials without sacrificing strength and durability.
The main "unibody" 3mm plate is CNC milled out of a solid sheet of premium Lumenier carbon fiber. The outer weave of the carbon fiber runs 100% down each arm of the QAV-X (0/90 weave), maximizing the strength of the carbon and arms. The center layers are offset at 45 degrees providing even and balanced strength throughout the entire plate.
The top plate includes an accessory antenna extension plate, allowing for multiple cable ties to lock down your antenna in place. No more damaging the SMA connection on your VTX. The top plate also has a cutout allowing access to your VTX button and LED displays for easy channel adjustment. The balancing bumps on the sides of the top plate make it easy to measure the center of gravity on your frame in the field to get the perfect balance.
The airframe comes with high quality aluminum hardware. All screws are premium, black oxide steel. The spacers have a textured grip surface treatment, which facilitates holding of the spacers during assembly and servicing of the airframe. The spacers are also 28mm tall vs the standard 35mm. This gives the airframe a sleek, low profile look.
The QAV-X features a unique FPV camera and HD mounting system. The FPV camera is recessed partially below the top plate and protected by the top cross bar, guarding your electronics. At the same time, the camera side walls act as an angled wedge to set your HD camera on for recording, such as a GoPro, at a 35 degree angle.
- Full 3K Carbon Fiber airframe with 3mm bottom plate.
- Ultra durable 2mm top plate.
- Black Oxide steel screws.
- Easy grip black anodized standoffs
- "Bumpers" on the end of the arms to protect the motor during a crash.
- Designed around popular 26mm sized cameras.
- Lightweight and rigid.
BNF Included Components and Parts:
- 1x fully built and tested Lumenier QAV-X Charpu FPV 5" Quadcopter
- 4x DYS Fire 2206 2300Kv Motors
- 1x DYS F30A 4in1 ESC
- 1x DYS F4 Pro Flight Controller board
- 1x Lumenier TX5G2R 200mW VTX with race band
- 1x Foxeer Arrow V3 Camera
- 1x Foxeer 5.8GHz Antenna (RHCP) with SMA
- 1x Spektrum Satellite Receiver with autobind
The airframe is professionally hand built and test flown. Simply bind
the receiver to your Spektrum transmitter, set up the switches on your transmitter, and you are ready to fly!
The DYS F4 Pro flight controller comes pre-flashed with BetaFlight. You can download the configuration software here.
Coupons not accepted for Bind and Fly drones.