- 3K Carbon Fiber and Aluminum
All of our frames are made of high quality, ultra-durable, 3K carbon fiber, with the aluminum CLS (Channel Lock System), designed for high performance FPV flying.
- Hand Built and Tested
All drones are hand built and test flown for you, so you can simply bind to your radio and fly!
- Newest Betaflight Version
All flight controllers used in our BNF models are set up with Betaflight. Settings can be changed or fine tuned per the customer's preferences with the Betaflight Configurator.
- Racing and Freestyle Builds
We specialize in building both 3" and 5" FPV racing quads, as well as 5" Freestyle rigs.
- The Strongest Frames on the Market
Every build starts with the frame. Check out the reviews by Joshua Bardwell and Jon E5 FPV Drones on YouTube.
- Aluminum CLS (Channel Lock System)
All of our frames include the billet machined aluminum CLS (Channel Lock System), providing maximum strength, and allowing quick, one-screw arm changes!
- Highest Quality Components
We use only the best components when building your custom Bind and Fly quad.
- Meticulous Build Process
Our build process is meticulous, ensuring that you receive a working, flying quadcopter right out of the box. Just bind your radio to the quad's receiver, and you are ready to fly!
- Analog or Digital TPU in 12 Colors!
All of our frames include your choice of TPU in a dozen colors! Our 5" Boa Freestyle build can be ordered with analog TPU, or digital TPU (DJI).
- Optional TPU Canopies and Top Plate Protectors
All of our frames include 3K carbon fiber top plates. For our 3" Cobra Micro and 5" Cobras we offer optional TPU canopies or top plate protector and turtle fins.
- Your Custom Bind and Fly
Sky Ready RC can build you a custom Bind and Fly today!
Cobra SLX EVO 5" Racing Frame
The EVOlution of the Cobra frame is here. Presenting the SLX EVO 5″ Racing Frame, by Sky Ready RC. The strongest 5″ racing frame on the market is now even stronger with our optional 4mm carbon fiber arm braces!
The Cobra SLX EVO stands apart from other frames because of the innovative aluminum CLS (channel lock system) which captures the carbon fiber arm at 3 different points with minimal hardware, resulting in a frame with extreme durability.
- 3K carbon fiber chamfered arms (5mm thick)
- Countersunk bottom plate screws
- Billet machined aluminum CLS Plates (Channel Lock System)
- Beautifully printed TPU parts (available in 12 colors)
- Accommodates 20×20 stacks ONLY
- Accommodates NANO cameras (14×14) ONLY
- 70g (including hardware)
Cobra Micro 3" Racing Frame
Enjoy never before seen performance, realism and durability in a 3″ racing frame, with the Cobra Micro! The Cobra Micro 3″ racing frame is a miniature version of the ever popular Cobra racing frame. The Cobra Micro 3″ retains all the magic of its bigger brother, and delivers it in a smaller package. Perfect for micro racing in the backyard, but still capable enough to fly on a 5″ track. (Shown with optional TPU canopy).
The Cobra Micro was created to be the ultimate 3″ frame in terms of durability. The Cobra Micro retains the innovative aluminum CLS (channel lock system) found on the 5″ Cobra, which captures the carbon fiber arm at 3 different points with minimal hardware.
- 3K carbon fiber arms (4mm thick)
- Billet machined aluminum CLS Plates (Channel Lock System)
- 9x9mm AND 12x12mm motor mounting
- Interchangeable arms
- Beautifully printed TPU parts (available in 12 colors)
- Accommodates 20×20 stacks ONLY
- Accommodates NANO cameras (14×14) ONLY
- 37g (including hardware)
Boa 5" Freestyle Frame
The Boa 5″ freestyle quadcopter is an X frame design, making flight characteristics evenly balanced on every axis. The frame is extremely durable, while being easy to work on, and was designed for the ultimate in FPV freestyle flying.
The Boa utilizes the same innovative aluminum CLS (channel lock system) as the Cobra, which captures its 6mm thick arms at 3 different points with one screw, resulting in an extremely durable frame. The CLS plates are located at the front and rear of the frame, and are not connected to the stack in any way. This results in an extremely rigid frame, with no fear of damaging your stack in hard crashes.
- 3K carbon fiber arms (6mm thick)
- Billet machined aluminum CLS Plates (Channel Lock System)
- 16 x 16 motor mounting
- Interchangeable arms
- Beautifully printed TPU parts (available in 12 colors)
- Accommodates digital and analog video out of the box (select digital or analog video TPU parts)
- 124g (including hardware)
Aluminum CLS (Channel Lock System)
Sky Ready RC makes the strongest frames on the market, due to the innovative aluminum CLS (channel lock system) which captures the carbon fiber arm at 3 different points with minimal hardware (allowing for 1-screw arm changes). However, unlike other frames, the stack is mounted to a carbon fiber plate, allowing rigidity while still preventing the unwanted energy transfer from an aluminum center plate to your stack in a hard crash. Instead of an aluminum center plate bending beyond repair in a hard crash, the carbon fiber mid plate absorbs crash energy to save your expensive stack.
The arms are anchored by the CLS plate in 3 different positions, which completely eliminates “arm wiggle”, even after continuous crashing.
2022 Hobbywing FPV Winter Nationals
The 5th iteration of the FPV Winter Nationals will take place Saturday and Sunday, December 3rd & 4th. We are very excited to have Hobbywing back as our title sponsor this year! This race has something for everyone!
2 skill classes: Sportsman FPV and Open FPV
– $50 Pilot entry for SATURDAY 5″ $1K racing
– $10 pilot entry for SUNDAY Freedom Spec
– $10 pilot entry for SUNDAY 3″ Racing
8 rounds of heads-up racing for each class (5 rounds of qualifying to determine starting order for the mains; Triple A-main events).
$1,000 in total CASH winnings and acrylic trophies to both podium class finishers for SATURDAY 5″ RACING: (1st: $250, 2nd: $150, 3rd: $100).
Pilot raffle with prizes from Hobbywing, Tattu, Foxeer and RunCam!
Dominos Pizza lunch for pilots provided by Sky Ready RC!
Schedule for BOTH days:
– 9am: Sign-ups and tech check opens
– 10am: Pilots meeting and track walk
– 10:15am: Practice rounds start
– 11am: Racing starts
Visit our FaceBook page to sign up for the 2022 FPV Winter Nationals.
FPV Race Director Services
If you have an upcoming FPV event in the Houston, San Antonio, Austin, Waco, Dallas, or surrounding areas, and you need an FPV Race Director, contact Sky Ready RC today.
Sky Ready RC Frame Review by Joshua Bardwell
“I was on a quest to find the right balance between light weight and durability. To be honest with you, frames don’t impress me much. But Sky Ready RC has done something REALLY interesting with these frames …”
– Joshua Bardwell (FPVKnowItAll)
Cobra SLX EVO Review by Jon E5 FPV Drones
About Our Frames:
“Unlike a lot of the other aluminum designs … Super fast and easy assembly … I’ve never done an arm swap so fast … Wow. Has the best motor protection of any frame I’ve seen to date. This is a REALLY nice racing frame”.
About Our Bind and Fly Builds:
“One of the things I really liked to see on this build was all the little touches … Immaculately measured and soldered”.
– John E5 FPV Drones
